|
|
|
« on: July 06, 2009, 04:56:17 PM » |
|
Hey Bear,
I know I have emailed you about this before, and I figured I would post it to see what others thought. Sorry If this is a reposted Idea, I have not had time to read through every post on here.
My wife and I have always wanted to be tied butt to butt...... and we have different size... umm... holes lol. She needs the ruff stuff to get a good tie and I usually just use the kit fox.
I was trying to figure out a way for this to work, but the main issue here is that you would have to insert a solid mounting point to make this possible, but obviously this could cause the toys to tear; thus reducing the life of the toys....
I was playing around with two of the silicone ruffstuff's we have and noticed that if you press the bases together firmly so all the air is out of them, they are nearly impossible to pull apart, even when wet. But when I tried with two different sized bases it did not work quite as well.
My idea is, what about making all new toys from now on have a standard sized (or option to get a standard sized) base so they can be stuck together. That way, she can have a horse one night and a dog the next and we only need to press them together.
Just an idea for ya
|
|
|
|
|
Logged
|
|
|
|
|
|
|
|
« Reply #1 on: July 06, 2009, 04:58:56 PM » |
|
hehehe... just relax and try the wolfie again  [sorry for this useless reply  ] |
|
|
|
|
Logged
|
|
|
|
|
|
|
|
« Reply #2 on: July 06, 2009, 05:01:05 PM » |
|
hehehe... just relax and try the wolfie again [sorry for this useless reply ] LOL yeah I can fit it... but my wife likes to be umm.... well rough hehe, so I need a toy that is not as tight. |
|
|
|
|
Logged
|
|
|
|
|
|
|
|
« Reply #3 on: July 06, 2009, 05:03:33 PM » |
|
Silicone is very stretchy. Pretty much the only way to rip it from stretching is by using a machine to pull both ends. Highly highly unlikely you can do it yourself.
As for a standard base size, that would be quite troublesome. Depending on how BB wishes to make new toys, it could cost in the range of $1000 (or more) to do a standard base and non-standard.
Best would be just to make a dual-toy designed for the purpose.
|
|
|
|
|
Logged
|
Cannot keep track of PMs, so if it's an important matter use the ticket system.Website | Tickets | Rules
|
|
|
|
|
|
|
« Reply #4 on: July 06, 2009, 05:09:48 PM » |
|
Silicone is very stretchy. Pretty much the only way to rip it from stretching is by using a machine to pull both ends. Highly highly unlikely you can do it yourself.
As for a standard base size, that would be quite troublesome. Depending on how BB wishes to make new toys, it could cost in the range of $1000 (or more) to do a standard base and non-standard.
Best would be just to make a dual-toy designed for the purpose.
Oh WOW, okay, I did not realize it was that expensive for your molds. I usually make my own... (not sexy toy molds though) |
|
|
|
|
Logged
|
|
|
|
|
|
|
|
« Reply #5 on: July 06, 2009, 05:27:36 PM » |
|
I myself would like to have some double ended zetas, but at the same time i wouldnt mind seeing some double ended without a base in the middle, maybe like take the bases off of 2 toys then just attach them at that spot. if BB could do it with some of the mid sized knotted toys i would love that even if they were in gel (but thats jus me ^^;)
~Icey_Kitsune
|
|
|
|
|
Logged
|
|
|
|
|
|
|
|
« Reply #6 on: July 06, 2009, 08:23:51 PM » |
|
hmm i actualy posted about this awhile back when the forum was just getting started  something like this would definataly be fun, sorry for the lack of drawing skills. |
|
|
|
|
Logged
|
Saw the whole thing, dude. First you were all like "whoa", and we were like "whoa", and you were like "whoa..."
Current Projects/Ideas:
Tail plug designing
Strap On harness for zeta toys
Plug/dildo harness for keeping toys inside
|
|
|
|
|
|
|
« Reply #7 on: July 07, 2009, 12:20:08 AM » |
|
now that you say it i remember you said that, completely forgot about that. i have seen a friend of mine who had 2 zeta toys that were melted together, he said he got them ordered that way but cant remember which doggy toys they were
~Icey_Kitsune
|
|
|
|
|
Logged
|
|
|
|
|
|
|
|
« Reply #8 on: July 07, 2009, 08:41:19 AM » |
|
now that you say it i remember you said that, completely forgot about that. i have seen a friend of mine who had 2 zeta toys that were melted together, he said he got them ordered that way but cant remember which doggy toys they were
~Icey_Kitsune
well now that owuld be interesting to see, ive always wanted one myself, since the mate and i want to be tied together too. would be an interesting venture to try out one day |
|
|
|
|
Logged
|
Saw the whole thing, dude. First you were all like "whoa", and we were like "whoa", and you were like "whoa..."
Current Projects/Ideas:
Tail plug designing
Strap On harness for zeta toys
Plug/dildo harness for keeping toys inside
|
|
|
|
|
|
|
« Reply #9 on: July 07, 2009, 07:32:27 PM » |
|
Have you tried taking something like a sheet of acrylic cut a little larger than the dimensions of the bigger base, and sticking a toy on either side of that? It's maybe not as elegant as having the bases stuck together, but it should do the job!
|
|
|
|
|
Logged
|
|
|
|
|
|
|
|
« Reply #10 on: July 07, 2009, 10:33:25 PM » |
|
Hey Bear,
I know I have emailed you about this before, and I figured I would post it to see what others thought. Sorry If this is a reposted Idea, I have not had time to read through every post on here.
My wife and I have always wanted to be tied butt to butt...... and we have different size... umm... holes lol. She needs the ruff stuff to get a good tie and I usually just use the kit fox.
I was trying to figure out a way for this to work, but the main issue here is that you would have to insert a solid mounting point to make this possible, but obviously this could cause the toys to tear; thus reducing the life of the toys....
I was playing around with two of the silicone ruffstuff's we have and noticed that if you press the bases together firmly so all the air is out of them, they are nearly impossible to pull apart, even when wet. But when I tried with two different sized bases it did not work quite as well.
My idea is, what about making all new toys from now on have a standard sized (or option to get a standard sized) base so they can be stuck together. That way, she can have a horse one night and a dog the next and we only need to press them together.
Just an idea for ya
The easiest way I've found to "pry" two tightly-pressed toys apart is to not pull the two toys, but instead, to press a finger to the bases and push in. This will cause the bases to part slightly, allowing air to slip inside and undo the suction. It's what I have to do in order to remove my toys from, say, a wall or some other flat surface that they work with. *blushes a bit* |
|
|
|
|
Logged
|
|
|
|
|
|
|
|
« Reply #11 on: July 08, 2009, 01:44:15 PM » |
|
We just stick the bases together, and suction holds em quite well, as long as you dont get too carried away |
|
|
|
|
Logged
|
|
|
|
|
|
|
|
« Reply #12 on: July 08, 2009, 02:02:31 PM » |
|
We just stick the bases together, and suction holds em quite well, as long as you dont get too carried away i think im gona have to get me some longer toys then *grins* |
|
|
|
|
Logged
|
Saw the whole thing, dude. First you were all like "whoa", and we were like "whoa", and you were like "whoa..."
Current Projects/Ideas:
Tail plug designing
Strap On harness for zeta toys
Plug/dildo harness for keeping toys inside
|
|
|
|
|
|
|
« Reply #13 on: July 08, 2009, 02:14:51 PM » |
|
somewhat of a suggestion that could be interesting, well 2 actually, just one of them is quite a ways away from possibly being implemented, this would be a double ended doggy toy.
so you got 2 standard doggie toys on each end, but instead of a smooth shaft between the 2 knots have a 3rd knot, i know some (myself included) like the feeling of the knot outside but also inside aswell.
the second suggestion (which isnt really close to being made) would be to have the same as above but using inflatable knots, and using a T connector to take the input of the bulb and spread it to the 2 knots that would go inside the users. this may not be that great of an idea but figured id put it out there, as doing it this way would make it hard for a single user to use the pump.
just some thoughts really, dont know how hard it would be to implement or anything so yea.
~Icey_Kitsune
|
|
|
|
|
Logged
|
|
|
|
|
|
|
|
« Reply #14 on: July 08, 2009, 03:02:21 PM » |
|
hell yeah.. i tried somehting.. *pant* well, let the picture do talking....  sticks perfectly to each other... have phun... [Helmutt | Timber Wolf] |
|
|
|
|
Logged
|
|
|
|
|
|
