Design for a silicone canid sheath and ball attachment.

[Karabiner]

 I recently saw FetishZone's new Cerberus Sheath attachment. The first thing that struck me about it was the rather 'clinical' (for want of a better word) base to it, which looked uncomfortable around the balls. Another thing which I noticed was, of course, that it only works when the user is erect. I know plenty of furs who'd love to tuck their junk away inside a warm sheath after a session, if only to feel a bit more animalistic. So, I had the idea of an all-parts-included silicone sheath. It would consist of a pouch, hollow on the inside with a hole in the back to slip inside. The pouch would of course be shaped like a canid's crotch - two balls which lead up to a sheath. It would even be an idea to put a slit in the tip of the sheath, and have the silicone around that area a little thinner so that the user's member can slide right out quite naturally when erect.

I had a friend of mine draw up a basic sketch as a reference. These wouldn't be the final proportions of course, as I've never tested anything like this to know what sort of size it ought to be... But it gives you an idea.



I can imagine it being worn around the house or whenever the mood strikes... It would even be easy to clean as the user could simply invert the whole pouch and wipe it over.

Final afterthought - Fursuiters would love this. There doesn't exist anything like this yet and I'm certain that it'd make a perfect addition to many people's suits.
(Thankyou to Ookami for the drawing! <3 )

[pouncytaur]

sounds interesting, and would be kinda cool.  I would think that the thinner silicon around the tip would be prone to ripping.. though that's only happened to me with a jelly toy. I would think you'd want a pretty big sack on that so that those with large balls would be able to keep them in the sack and not get pushed out one at a time.. also a reason to have a thicker ring around the opening as a sort of Cock and balls ring, though not tight enough to cause restriction and long term discomfort.  I would see me having quite a bit of difficulty getting my balls into the sack in the first place though..  any techniques that work well, without one escaping while the other is being pushed in?

[jsealing]

Looks great to me, but I couldn't use it. Silicone would definitely be the way to go on this one, though.

[Red-Black]

Yes, this would be pretty neat. The closest thing to it I ever saw was BigWuff's costume, though that one technically had a functioning prosthetic penis with sheath and not just a sheath.

I would think that it wouldn't really have to be that thin anywhere as a bit of lubricant would let things slip right through the opening. Silicone is definitely durable enough to use for this and the stretchiness could help the feel of things.

[Karabiner]

Yes, this would be pretty neat. The closest thing to it I ever saw was BigWuff's costume, though that one technically had a functioning prosthetic penis with sheath and not just a sheath.

I would think that it wouldn't really have to be that thin anywhere as a bit of lubricant would let things slip right through the opening. Silicone is definitely durable enough to use for this and the stretchiness could help the feel of things.

Oh nice, I've never seen that costume before.

Maybe the thinness would be unnecessary, but I think it'd add to the comfort of it. If the silicone was too firm and too thick, then as the slit gripped around the base of the penis it might pinch a bit too much, but eh; I'm pretty new to silicone materials ^^;

An added thought; It'd probably have to come in different sizes. If it wasn't snug around users with smaller members/sacs it could slide off, and the feeling produced wouldn't be as intended.

And Pouncy, I agree with you on the ring idea. As you can see in the drawing the intent was to have a thicker rim of silicone around the opening, but of course it'd have to be correctly sized so it wasn't uncomfortable. As for putting it on, that really shouldn't be too much of a problem, you could just stretch it around your crotch and release, depending on the elasticity of the material to hold it in place.

Oh, and I've been asking people what they'd think of this as a purchase. The best one yet was 'Fuck yes I'd buy one' o_o And overall it's fairly positive.

EDIT:

A few people have mentioned that they'd like to have the sheath be furred... I know that actual fur would be hard to achieve, but what about a furred texture applied to the silicone on the outside? It'd take away some of the artificial feel of the material, and make it more realistic

[Ravenwolf312]

It is an interesting idea... Very much so..  I'd think that people would be insanely interested in this if it came with a faux fur slip cover that could slip over the outside. I like the idea.. But just seeing sillicone down there and it supposed to be "animalistic" is I little unnerving xD I think the fur cover would dramatically increase interest, as it would also be removeable.

But also here's another idea... Since it could have a cover.. Why not just take off the ball covering part of the silicone? Since no two males are the same it would make sense to take it off and let the faux fur cover anyone's goodie bits. It's a great idea and hell yea I'd buy one if it was a good design and had the faux fur slip cover.

[Karabiner]

Well it'd undoubtedly be a consideration as an accessory, maybe. Because different furs have different tastes, it'd make more sense to sell covers which have different designs rather than including a basic, standard one which might get thrown away.

As for removing the ballsack, well, that would bring along complications in several areas; First off, you lose the integrity of the design and have two different materials in one product - Silicone is intended to be shaped into single parts and attaching a ballsack of a different material would make it more prone to damage if it were directly bound to it. If the ballsack came as a whole cover, then you have the problem of both functionality and elasticity - If it were just a sheath to start off with, then it would be useless without a cover. And if the cover wasn't made out of something suitably stretchy/elastic, it might be uncomfortable for some.

But yeah, I'm agreed that it should have SOME way of attaching fur. For those that don't want to invest in a cover, the furred texture on the silicone would work well enough, I think. ^ -^

Thanks for the input, much appreciated~

[Ravenwolf312]

Well it'd undoubtedly be a consideration as an accessory, maybe. Because different furs have different tastes, it'd make more sense to sell covers which have different designs rather than including a basic, standard one which might get thrown away.

As for removing the ballsack, well, that would bring along complications in several areas; First off, you lose the integrity of the design and have two different materials in one product - Silicone is intended to be shaped into single parts and attaching a ballsack of a different material would make it more prone to damage if it were directly bound to it. If the ballsack came as a whole cover, then you have the problem of both functionality and elasticity - If it were just a sheath to start off with, then it would be useless without a cover. And if the cover wasn't made out of something suitably stretchy/elastic, it might be uncomfortable for some.

But yeah, I'm agreed that it should have SOME way of attaching fur. For those that don't want to invest in a cover, the furred texture on the silicone would work well enough, I think. ^ -^

Thanks for the input, much appreciated~

No problem.. And I understand what you mean about the sack part.. But it woul still need a ring to go around them.. Leaving one's balls to hang freely could possibly be a better idea instead of confining them in a non-porous sack. Also the faux fur would not be attached at all, it would merely be a slip cover that would slip on the sheath and balls after application. It would not be connected and would allow "furred" use and non furred use. This is a really awesome idea, I'd like to see it made I know I'd like to have some input on the idea and I'd certainly buy one.

[Red-Black]

As to fur-covering, that would be best handled by the toy's owner. It would not be hard to create a removable ring of fake fur or a pouch for testicles. Also  with all the insane fur patterns people out there, it would make sense to let people do their own as making fur covers would become a 24-7 job.

Besides, unless you are wearing a fursuit, having furry balls and nothing else is going to feel really weird. If you are in a fursuit built for sex, it probably has fur-covered balls already.

A few people have mentioned that they'd like to have the sheath be furred... I know that actual fur would be hard to achieve, but what about a furred texture applied to the silicone on the outside? It'd take away some of the artificial feel of the material, and make it more realistic

Actually, that could be a nice option. At the least, it would make attaching fur easier as the fur would have something to "grip" to. Personally, however, I have not seen many animals with furry balls so I'd opt for the skin version myself.

[ironpawes]

two cents... ok so i am a proud owner of a Cerebrus and let me start by saying its a good product if you want to feel more animalistic...and my women likes it. *coughs* moving on... ^.^ the one problem i have encountered time and time again is that the cerebrus keeps wanting to come off, now keep in mind that im not as well endowed as some furrys out there but you work with what you got.... i have also heard tales of other furrys having the same issue. i would think that the same problems would arise here... if you were to try and use it as a sheath and actually engage in the act of sex i could forsee it wanting to fall off. suggestion! make the hole inwich your member and testicles fit into small so its a tight fit into there resting place. that way when theres pull on the sheath it wont come off. other then that i would make the sheath not very bulky as not to loose sensativity to the shaft area. other than that its a good idea and i would buy one. ^.^

[redyote]

It's definitely different enough from the Cerberus toy, that's for sure. This seems to be for sheath fans, whereas the Cerberus is more for knot and tie lovers. Great concept! Really hope this takes off!