Pages: [1]
  Print  
Author Topic: A Quick Look at the Ruff Jr.  (Read 2657 times)
Quiet269
Jr. Member
**
Offline Offline

Posts: 98

  • Submit a product review of your Zeta Paws purchase. Post videos or pictures of using a toy or toys.

  • View current awards
    « on: November 29, 2009, 03:11:35 PM »

    I ordered this little boy on the 19th or April, I got it on the 27th, but picked up the package on the 28th. Quick Turn Around ^_^

    I have trouble imagining size, so I thought he was going to be bigger, but oh well, he's a perfect little warm up toy me thinks ^_^ And his knot can be quite the challenge if you're not ready for it...

    I got him in the recommended "Medium" hardness, though I probably could have gone with Firm too.

    He goes in nice, locks in tight and provides a very nice little butt buddy ^_^

    Overall he's perfect for the price, and if you're looking for somewhere to start, give him a try ^_^

    Now there is one thing I must note... his suction cup is... quite strong... I'll let the pics show you what I mean Tongue

    Now then... I recorded this for a friend... but I liked the ending enough that I wanted to share with you all...

    http://www.Quiet269.com/Porn/RuffJr.mov (Warning: Fat Man Tongue)

    I had the Bnaughty in my for like 2 hours while I was playing WoW & Chatting... and then followed that up with the ruff JR... I was trying to show that when I flexed my bum it would move in and out... but to get it to were it was visible would cause it to slip out... and the camera fell over several times -_- but once I moved the cam up front I could have a lot more fun... ^_^

    At the end I ended up tensing my bum so much it felt like I was sucking the Ruff Jr in... to the point that I thought that the flare on it was starting to go inside me too :oops: it was awesome, but I was weary of it at the same time... I didn't want to go to the emergency room to remove a sex toy Tongue
    Logged

    Order #1294... Order Generated on January 27th, 2010. Order Price, $300. 4 Toys... Coming up one 1 year and still not left the Molding Queue.

    To say I'm disappointed would be an understatement.

    hijinxus
    Newbie
    *
    Offline Offline

    Gender: Male
    Posts: 41


    what?

  • You own a boxie! Make your first post on the forums.

  • View current awards
    « Reply #1 on: November 29, 2009, 03:53:29 PM »

    Cute pictures! (if a bit unconventional...) I wouldn't be able to hold a straight face with that on my forehead.  Cheesy
    Logged

    Quiet269
    Jr. Member
    **
    Offline Offline

    Posts: 98

  • Submit a product review of your Zeta Paws purchase. Post videos or pictures of using a toy or toys.

  • View current awards
    « Reply #2 on: November 29, 2009, 04:01:58 PM »

    Around the time that I got it people were talking about place to stick toys... and that the Bad Dragon Toys were shaped oddly so they wouldn't really stick to you... so when I got this guy I had to give it a try... and sure enough, he stuck lol
    Logged

    Order #1294... Order Generated on January 27th, 2010. Order Price, $300. 4 Toys... Coming up one 1 year and still not left the Molding Queue.

    To say I'm disappointed would be an understatement.

    Alithyra
    Full Member
    ***
    Offline Offline

    Gender: Male
    Posts: 122


    The fox in the box!

  • You own a natural akita! Purchase a Zeta Paws product for someone special.

  • View current awards
    « Reply #3 on: November 29, 2009, 06:34:48 PM »

    Haha I love the pictures! I also approve of the info you provided, I ordered the same toy, however, I ordered mine in hard so I will see, I am currently working on the Natural Akita >.>; It came first, so I had to try it! Tongue
    Logged

    Owner of the Natural Akita, Timber Wolf, Boxie the Fox, Euro Ruff Jr, Micro Rider, The Gel Akita and the Oskar.. :3

    zqfmgb
    Sr. Member
    ****
    Offline Offline

    Gender: Male
    Posts: 494

    Never confuse passion and asthma

  • You own a natural akita! Make an introductory post on the forums.

  • View current awards
    « Reply #4 on: November 30, 2009, 02:13:18 AM »

    Bwa ha ha! That works well with that toy. I did that with a different one, and it left a mark for nearly a week. Rather awkward to be asked about a lot, too.
    Logged

    Ya tell me put a little money away
    Every dog'll have his day in time
    Well I been slavin' like a dog and I got nothin' to show ya
    But a collar and a fist fulla nickels and dimes

    Quiet269
    Jr. Member
    **
    Offline Offline

    Posts: 98

  • Submit a product review of your Zeta Paws purchase. Post videos or pictures of using a toy or toys.

  • View current awards
    « Reply #5 on: November 30, 2009, 12:07:01 PM »

    Haha I love the pictures! I also approve of the info you provided, I ordered the same toy, however, I ordered mine in hard so I will see, I am currently working on the Natural Akita >.>; It came first, so I had to try it! Tongue
    Thanks Smiley

    I wouldn't worry too much about the Firmness... I mean, I have an 8 Firmness Bad-Dragon Toy, and even it is rather squishy...
    Bwa ha ha! That works well with that toy. I did that with a different one, and it left a mark for nearly a week. Rather awkward to be asked about a lot, too.
    You Wuz Assaulted by a... SUCTION CUP!

    ...

    They -might- believe that... I guess it depends on if you could see the paw print logo lol
    Logged

    Order #1294... Order Generated on January 27th, 2010. Order Price, $300. 4 Toys... Coming up one 1 year and still not left the Molding Queue.

    To say I'm disappointed would be an understatement.

    zqfmgb
    Sr. Member
    ****
    Offline Offline

    Gender: Male
    Posts: 494

    Never confuse passion and asthma

  • You own a natural akita! Make an introductory post on the forums.

  • View current awards
    « Reply #6 on: December 01, 2009, 02:21:24 AM »

    It was a big blotch on my forehead from broken capillaries.

    I was screwing around and got my suction cups to stick pretty well on the wall! I was happy. I did the phallicorn thing, too Tongue Finally worked.
    Logged

    Ya tell me put a little money away
    Every dog'll have his day in time
    Well I been slavin' like a dog and I got nothin' to show ya
    But a collar and a fist fulla nickels and dimes

    Talbain
    Toyless
    *
    Offline Offline

    Gender: Male
    Posts: 1

  • You own a ruff jr!

  • View current awards
    « Reply #7 on: December 22, 2009, 06:42:59 PM »

    I personally liked my ruff jr.  It was a great start with this sort of play, and i STILL use it, almost more than my other toys.  I think its also a decent trainer for larger toys, like the Ruff Stuff Sr...Same shape, different size.  Not much to adjust for...cept maybe a larger knot :-)
    Logged

    Ayame
    Full Member
    ***
    Offline Offline

    Gender: Female
    Posts: 249


  • You own a raptor! Choose the hard option for any toy.

  • View current awards
    « Reply #8 on: December 23, 2009, 06:32:53 PM »

    One thing's for sure.  That little "phallicorn" thing would add a whole new meaning to, "Hey baby, come sit on my face."

    Sorry, sorry, I just had to do that.  Shocked  My inner demon overcame my "better angels".  


    Edited to Add:  Big apologies to anyone who might be grossed-out by my remark.  It was not my intention to offend anyone.
    « Last Edit: December 23, 2009, 06:43:32 PM by Ayame » Logged

    Proud Owner Of:
    Mr Plugit, Euro Ruff Stuff, Timberwolf, Raptor, Knotty Trainer, Knotty Instructor, and The Orca

    Quiet269
    Jr. Member
    **
    Offline Offline

    Posts: 98

  • Submit a product review of your Zeta Paws purchase. Post videos or pictures of using a toy or toys.

  • View current awards
    « Reply #9 on: January 10, 2010, 05:33:19 PM »

    lmao. That would be quite the experience right there...

    I must admit... it'd probably rather enjoyable to have someone bobbing on my forehead like that  Grin
    Logged

    Order #1294... Order Generated on January 27th, 2010. Order Price, $300. 4 Toys... Coming up one 1 year and still not left the Molding Queue.

    To say I'm disappointed would be an understatement.

    Pages: [1]
      Print  
     
    Jump to: