Toy idea: The Tester

[Xisis]

I have an idea for a fun trainer toy; One that has tiers with a bevel between them for easy transition. I'm thinking maybe an inch and a half long per diameter step and go up in .5" increments starting at 1" or 1.5" So if you made it about 10 inches long it would go out to about 5" diameter. You could even mold the dimensions right into each ring (diameter in Inch/CM, circumference in Inch/CM). I think it would be a great stretching toy and give people on the forum a way to compare, and a way to  judge what toys they can comfortably use.

For it to be a fair comparison between folks it should probably only be sold in one stiffness.

What do ya think?

[knotme]

hey thats a good idea, not only for the toy but as a way to figure out what toys you can use comfortably and which ones you need to stretch out more for.  I like the starting dimentions you give and the going up rate as well.  And a second larger toy could also be made using the same scale as you give just starting out at a larger dimention from this first one and continue to use the same scale for the 10".   I would certainly be interested in a toy like this as I was looking for something like this to help me take the silicone slider and akita.

[zqfmgb]

Sounds good, though I would almost suggest that it be a bit longer. Maybe 12-14". Wouldn't really need to go any wider... 5" is pretty hefty, though an extra inch wouldn't be that bad of a thing for the base.

If you wanted to restrict the firmness, I'd suggest Hard... it's meant to be a stretching toy, after all.

[Brownbear]

Actually I like the idea
folks could use it to see how big a toy the can take, I couls use it to say, that if you can take the first bump, you can use these toys, for the second level can be these toys, etc..

[Xisis]

I drew up a quick sketch to illustrate my description. Might need a little tweaking but it gets the basic idea across visually at least.

Edit: After thinking about it, the 2 sizes seemed like a good idea, so I sketched that up too.

[Ayame]

I love, love, LOVE this idea Xisis!  It's the reason that the Knotty trainer toys were in my first Zeta orders.  I especially like that you've left a reasonable length on each size before moving on to the next, so each one feels like a real "step".  But speaking as a woman, could I suggest a small  change to your proposed design?

The vagina has a limited length, differing by the woman, her body position, and degree of arousal.  Even at the reasonable lengths you propose, I might be unable to reach the last couple of levels, to use them for testing or training purposes.  So I'd like to see a the toys overlap each other by two to three sizes, rather than just the one size currently proposed.  

If doing that makes the toy too long to be affordable and easy to store, how about having three toys in this series - Student, Graduate, and ... Professor ??

[knotme]

I concur with Ayame, that perhaps 3 would be a little bit better that way you can have more room between each step and would allow for maximised stretching for either the anus or vagina, like say for the student .5" down to 3", graduate would start at 2" going down to 4.5", and the professor starting at 4" and going down to 6.5", this way you can keep each one at the same length but starting at and going down to different thickness'  Just another thought on what Ayame has brought up.

[Xisis]

What do you think is a good max length to go by? I can do up some sketches based on that and see how it would break down for a set of 3.

[knotme]

for me personally I would say 10 or 11 inches but thats just me, some may say 12 or even 13 long.  Just whatever you decide.

[zqfmgb]

If you're looking for serious usability anally and vaginally, you wouldn't really want to go beyond 10 inches -- it's a rather rare woman that can use even that much. You might want the overlapping width at about 8" in... even 7" wouldn't be a bad idea. But for a total length, 10" wouldn't be bad. I wouldn't mind a bit more, but if you're serious about more dual functionality I would put it about there.

[Xisis]

Here's a nicer sketch I did at work.

These three are 9, 9.5, and 10 inches. 1st is 1" to 3.5", 2nd is 3" to 5.5" and the 3rd is 5" to 7.5".

That puts the overlap at 6.5 and 7 inches as you go up. They should be very useable with these dimensions.

[Ayame]

Damn Xisis!  Niiiiiice job there on the sketches!  You totally got what I was thinking of!  And I like your lengths too.

Sorry for this late afterthought, but it would be nice to have a handle or some sort of base to these guys.  For those using them with a partner, it would make them easier to grab hold of and use.

[knotme]

Yahtzee!!! winner winner chicken dinner.  If it were up to me they'd already be in production....hehehe.  Very well done with those drawings and finguring out the dimmentions of each.