Pages: 1 [2] 3 4
« previous next »
  Print  
Author Topic: Got time or one of our toys and want to help us out? Read inside  (Read 8738 times)
Talarath
Administrator
Hero Member
*****
Offline Offline

Gender: Male
Posts: 1098


  • Purchase a toy you aren't quite ready to use yet. Become a forum Administrator.

    • WWW View current awards
    « Reply #15 on: February 17, 2010, 07:47:43 PM »
    Going through the toys now.  I've also added two new measurement areas which are:
    Width near base
    Circumference near base

    Both should still be in the usable area.  Added due to no listing for plug or tapered type toys.
    Logged
    Cannot keep track of PMs, so if it's an important matter use the ticket system.
    Website | Tickets | Rules

    jsealing
    Staff
    Hero Member
    ***
    Offline Offline

    Gender: Male
    Posts: 763


    I own Akita, Darius, Fossa, Gator, Tentacle


    WWW View current awards
    « Reply #16 on: February 17, 2010, 08:57:07 PM »
    Okay, will do.
    Logged
    Retired The Tiger; Wolf's Cock Toy has a new good home Smiley.

    Talarath
    Administrator
    Hero Member
    *****
    Offline Offline

    Gender: Male
    Posts: 1098


  • Purchase a toy you aren't quite ready to use yet. Become a forum Administrator.

    • WWW View current awards
    « Reply #17 on: February 18, 2010, 07:21:23 AM »
    All toys (should) now have basic measurements that were included on the site beforehand.
    Anyone is free to measure, just be sure to use a tape ruler for circumference and not a hard platic/wood one.
    Remeasuring the ones already provided would also be of help because I'm not 100% on what BB meant when he did some of these.
    Logged
    Cannot keep track of PMs, so if it's an important matter use the ticket system.
    Website | Tickets | Rules

    shuya
    Newbie
    *
    Offline Offline

    Gender: Male
    Posts: 15


  • Purchase a Silicone toy. You own a boxie!

    • View current awards
    « Reply #18 on: February 19, 2010, 06:37:57 AM »
    only toy i got is boxy. got a tape and stick measurer. (approximate measurements >.>)

    total length: 5.5 inches (14 cm)
    usable length: 4.5 inches (11.4 cm)
    head width: .75 inches (1.9 cm)
    head circumference: 3 inches (7.6 cm)
    shaft length: 2.75 inches (7 cm)
    shaft width: 1.125 inches (approximate) (2.9 cm)
    shaft circumference: 4 inches at widest 3.75 inches at thinest (10.2 cm and 9.5 cm)
    knot length: 1.5 inches (3.8 cm)
    knot width: 2 inches (5.1 cm)
    knot circumference: 5.75 inches (14.6 cm)
    width near base: 1.25 inches (3.2 cm)
    circumference near base: 4.5 inches (11.4 cm)
    length behind knot: .5 inches (1.3 cm)
    length of base: .75 inches (1.9 cm)

    whew enjoy
    Logged

    Alithyra
    Full Member
    ***
    Offline Offline

    Gender: Male
    Posts: 122


    The fox in the box!

  • You own a natural akita! Submit a product review of your Zeta Paws purchase.

    • View current awards
    « Reply #19 on: February 27, 2010, 08:25:05 PM »
    Here's contribution  to this. Some may have been posted already, but meh.
    The shaft lengths are measured from the base of the knot to the very tip.
    Any other questions just ask me. Since I finally received my Timber I shall put up his measurements as well.

    Timber Wolf

    Total length. 8 3/4"   22.2 cm
    Usuable length. 7 1/2"  19.1 cm
    Head Width 1 1/4"   3.2 cm
    Head Circumference. 4 1/4"  10.8 cm
    Shaft length. 4 1/2"  11.4 cm
    Shaft width. 1 5/8"    4.1 cm
    Shaft circumference. 5"  12.7 cm
    Knot length. 1 3/4"  4.4 cm
    Knot width. 2 3/4"   7 cm
    Knot Circumference. 7 1/2"   19.1 cm
    Width near base. 1 3/4"    4.4 cm
    Circumference near base. 5 3/4"   14.6 cm
    Length behind knot. 1"   2.54 cm

    Boxie
    Total Length. 5 1/2"   14 cm
    Usuable Length. 4 3/4"   12.1 cm
    Head with. 3/4"    1.9 cm
    Head Circumference.3 1/4"    8.3 cm
    Shaft length. 2 3/4"   7 cm
    Shaft width. 1 1/4"   3.2 cm
    Shaft Circumference. 4"   10.2 cm
    Knot length. 1 1/2"  3.8 cm
    Knot with. 2 1/8"   5.4 cm
    Knot Circumference. 6"   15.2 cm
    Width near base. 1 3/8" 3.5 cm
    Circumference near base. 4 1/2"   11.4 cm
    Length behind knot. 3/4"   1.9 cm


    Euro Ruff Jr.
    Total Length. 5 1/2"   14 cm
    Usuable length. 4 1/2"   11.4 cm
    Head width. 3/4"   1.9 cm
    Head circumference. 3"    7.6 cm
    Shaft length. 2 1/2"    6.4 cm
    Shaft circumference. 3 5/8"    9.2 cm
    Knot length. 1 1/4"     3.2 cm
    Knot width. 1 3/4"     4.4 cm
    Knot circumference.5 1/4"   13.3 cm
    Width near base. 1 1/4"     3.2 cm
    circumference near base. 4"    10.2 cm
    length behind knot. 3/4".    1.9 cm

    Natural Akita.

    Total length. 9 1/4"     23.5 cm
    Useable length. 8 1/8"   20.6 cm
    Head width. 1 1/2"   3.8 cm
    Head Circumference. 5 5/8"   14.3 cm
    Shaft length. 4 3/4"   12.1 cm
    Shaft circumference. 6 3/8"  16.2 cm
    Knot length. 2 1/4"  5.7 cm
    Knot width. 3 1/2"  8.9 cm
    Knot Circumference. 9 3/8"   23.8 cm
    Width near base. 2"   5.1 cm
    Circumference near base. 6 1/2"   16.5 cm
    Length behind knot. 1 1/4"   3.2 cm

    Micro Rider.
    Total length. 5 1/4"    13.3 cm
    useable length. 4 1/4"   10.8 cm
    Head width. 1 1/2"   3.8 cm
    Head circumference. 5"  12.7 cm
    Shaft length to medial ring. 3 1/2" 8.9 cm
    Medial ring width. 1 5/8"    4.1 cm
    Medial ring circumference. 6"   15.2 cm

    Oskar.
    Total length. 7 1/4"     18.4 cm
    Useable length. 6 3/8"   16.2 cm
    Head width. 2 3/8"   6 cm
    Head circumference. 8"   20.3 cm
    Shaft length. 5"  12.7 cm
    Shaft width before medial ring. 1 7/8"   4.8 cm
    Shaft circumference. 6 1/2"  16.5 cm
    Shaft base width. 2 3/4"  7 cm
    Shaft base circumference. 9"  22.9 cm

    Akita (Gel)

    Total length 10 3/8"   26.4 cm
    Usuable length. 9 1/2"   24.1 cm
    Head width. 1 1/2"  3.8 cm
    Head Circumference. 5 1/4"   13.3 cm
    Shaft length. 5 1/2"   14 cm
    Shaft circumference. 6 1/4"   15.9 cm
    Knot length. 2"  5.1 cm
    Knot width. 2 1/2"  6.4 cm
    Knot circumference. 8 3/8"    21.3 cm
    Width near base. 1 1/2"   3.8 cm
    Circumference near base. 5 1/2"   14 cm
    Length behind knot. 2 1/4"   5.7 cm
    Length of base. 7/8"   2.2 cm
    « Last Edit: March 12, 2010, 05:51:02 PM by Alithyra » Logged
    Owner of the Natural Akita, Timber Wolf, Boxie the Fox, Euro Ruff Jr, Micro Rider, The Gel Akita and the Oskar.. :3

    Talarath
    Administrator
    Hero Member
    *****
    Offline Offline

    Gender: Male
    Posts: 1098


  • Purchase a toy you aren't quite ready to use yet. Become a forum Administrator.

    • WWW View current awards
    « Reply #20 on: March 08, 2010, 02:21:15 PM »
    Much thanks Alith and Shuya!
    I'll get to adding them as I go through our selection and update stuff.
    Logged
    Cannot keep track of PMs, so if it's an important matter use the ticket system.
    Website | Tickets | Rules

    Alithyra
    Full Member
    ***
    Offline Offline

    Gender: Male
    Posts: 122


    The fox in the box!

  • You own a natural akita! Submit a product review of your Zeta Paws purchase.

    • View current awards
    « Reply #21 on: March 09, 2010, 12:49:39 AM »
    Very welcome Tala. :3
    Logged
    Owner of the Natural Akita, Timber Wolf, Boxie the Fox, Euro Ruff Jr, Micro Rider, The Gel Akita and the Oskar.. :3

    doggieluvr2000
    Jr. Member
    **
    Offline Offline

    Gender: Male
    Posts: 63


    Woof, Woof

  • Submit a product review of your Zeta Paws purchase. You own a Slip Knot!

    • WWW View current awards
    « Reply #22 on: March 14, 2010, 07:29:00 PM »
    Here are the measurements for the 3 toys I have.

    Keeper   
    SKU   SKU162281
    Weight   1.00 lbs
    Total length   7.75" (19.68 cm)
    Usable length   7" (17.78 cm)
    Head width     .75" (1.9 cm)
    Head circumference   2.35" (5.98 cm)
    Shaft length   7" (17.78 cm)
    Shaft width    1.5" (3.81 cm)
    Shaft circumference   4.71" (11.97 cm)
    Knot length                       Not specified
    Knot width                       Not specified
    Knot circumference   Not specified
    Width near base   1.25" (3.175 cm)
    Circumference near base  3.93" (9.97 cm)
    Length behind knot   Not specified
       
    SlipKnot   
    SKU   SKU161431
    Weight   1.00 lbs
    Total length   8.25" (20.96 cm)
    Usable length   6.5" (16.51 cm)
    Head width                      .25" (0.6 cm)
    Head circumference   .79" (7.98 cm)
    Shaft length   4.25" (10.80 cm)
    Shaft width                      1" (2.54 cm)
    Shaft circumference   3.14" (7.98 cm)
    Knot length                      2" (5.08 cm)
    Knot width                     1.5" (3.8 cm)
    Knot circumference   4.71" (11.97 cm)
    Width near base   1" (2.54 cm)
    Circumference near base  3.93: (9.97 cm)
    Length behind knot   .5" (1.27 cm)
       
    Knotty Trainer   
    SKU   SKU161691
    Weight   1.00 lbs
    Total length   7.5" (19.05 cm)
    Usable length   7" (17.78 cm)
    Head width                     .5" (1.27 cm)
    Head circumference   1.57" (3.99 cm)
    1st Knot length   1.25" (3.175 cm)
    1st Knot width   1'' (2.54 cm)
    1st Knot circumference   3.14" (7.98 cm)
    2nd Knot length   2" (5.08 cm)
    2nd Knot width   1.5" (3.81 cm)
    2nd Knot circumference  4.71" (11.97 cm)
    Last Knot length   2" (5.08 cm)
    Last Knot width   1.875" (4.76 cm)
    Last Knot circumference  5.89" (14.96 cm)
    Width near base   1.2" (3.05 cm)
    Circumference near base  3.77" (9.58 cm)
    Length behind knot   .5" (1.27 cm)
    Logged
    I chart my own course through this existence that we call life.

    I follow my own ideals.

    Go and seek those others that will bring joy and happiness to your life.

    Do not seek to limit or deny anyone these same opportunities.

    DL2K

    Todroe
    Toyless
    *
    Offline Offline

    Posts: 3


    View current awards
    « Reply #23 on: March 14, 2010, 10:27:15 PM »
    Anyone got the Natural Akita yet??
    Would love to hear any details.
    Logged

    Talarath
    Administrator
    Hero Member
    *****
    Offline Offline

    Gender: Male
    Posts: 1098


  • Purchase a toy you aren't quite ready to use yet. Become a forum Administrator.

    • WWW View current awards
    « Reply #24 on: March 14, 2010, 10:29:52 PM »
    Quote
    Natural Akita.

    Total length. 9 1/4"     23.5 cm
    Useable length. 8 1/8"   20.6 cm
    Head width. 1 1/2"   3.8 cm
    Head Circumference. 5 5/8"   14.3 cm
    Shaft length. 4 3/4"   12.1 cm
    Shaft circumference. 6 3/8"  16.2 cm
    Knot length. 2 1/4"  5.7 cm
    Knot width. 3 1/2"  8.9 cm
    Knot Circumference. 9 3/8"   23.8 cm
    Width near base. 2"   5.1 cm
    Circumference near base. 6 1/2"   16.5 cm
    Length behind knot. 1 1/4"   3.2 cm

    From alithyra.
    Logged
    Cannot keep track of PMs, so if it's an important matter use the ticket system.
    Website | Tickets | Rules

    x_panther
    Full Member
    ***
    Offline Offline

    Gender: Male
    Posts: 163


  • You own a Seal! You own an orca!

    • WWW View current awards
    « Reply #25 on: March 16, 2010, 03:00:14 AM »
    alright *yawns* after a few hours of measuring and calculating i have completed the toy measurements i have x.x; yarg... hope i didn't overdo it on some of the accuracies >.>;

    numbered segments of a toy are numbered from base to tip. if anything needs clarity, let me know Smiley

    Ruff stuff original
    Total length: 8 1/2 inches (21.59 cm)
    Usable shaft: 7 5/8 inch (19.37 cm)
    Shaft root length: 1 inch (2.54 cm)
    Knot height: 1 1/2 inch (3.81 cm)
    Knot diameter: 2 3/8in profile (6.033 cm)
    Knot diameter: 2 1/4 dorsal (5.72 cm)
    Knot Circumference: 7 3/4 inch (19.69 cm)
    Pre-knot shaft: 4 5/8 inches (11.75 cm)
    Shaft width: 1 3/4 inch profile (4.45 cm) (widest point)
    Shaft width 1 1/2 inch dorsal (3.81 cm) (widest point)
    Shaft circumference: 5 1/2 inch (13.97cm) (widest point)
    Head: 1 1/2 inch profile (3.81 cm)
    Head: 1 1/4 inch dorsal (3.18cm)
    Head length: 1 1/2 inch (3.81 cm)
    Head circumference: 4 5/8 inch (11.75 cm)
    Tip: 3/8 inch @ 1/8 inch (.13cm @ .32 cm)

    Dragon
    Total length: 11 3/4 inches natural profile (29.85 cm)
    Total length: 12 1/8inch extended dorsal (30.80 cm)
    Usable shaft 10 1/4 inch natural profile (26.04cm)
    Usable shaft: 11 1/16 inch extended dorsal (28.10cm)
    Ridge set length: 3 inches  (7.62 cm)
    Ridge 1: 1 3/4 inch dorsal (4.45 cm)
    Ridge 1 : 2 5/8 inch profile (6.67 cm)
    Ridge 1: 6 3/4 inch circumference  (17.15 cm)
    Ridge 2: 1 15/16 dorsal (4.92 cm)
    Ridge 2: 2 1/2 inch profile (6.35 cm)
    Ridge 2: 7 1/4inch circumference (18.42 cm)
    Ridge 3: 2 1/8 inch dorsal (5.40 cm)
    Ridge 3: 2 1/2 inch profile (6.35 cm)
    Ridge 3: 7 5/8 inch circumference (19.37 cm)
    Shaft to ridges: 7 3/4inches natural (19.69 cm)
    Shaft to ridges: 8 inches extended (20.32 cm)
    Shaft behind head: 5 inches (12.70 cm)
    Shaft width: 2 inch profile (5.08 cm) (widest point)
    Shaft width: 1 7/8 inch dorsal (4.76 cm) (widest point)
    Shaft circumference: 6 1/4 inch (15.88 cm) (widest point)
    Shaft width: 1 5/8 inch profile (4.13 cm) (behind head)
    Shaft width: 1 3/8 inch dorsal (3.49 cm) (behind head)
    Shaft circumference: 4 3/4 inch (12.07 cm) (behind head)
    Head length: 3 1/2 inch (8.89 cm)
    Head maximum width: 2 inch profile (5.08 cm)
    Head maximum width: 1 3/4 inch (4.45 cm)
    Head maximum circumference: 6 inch (15.24 cm)
    Tip width: 1/4 inch @ 1/8 inch (.64 cm @ .32 cm)

    Griffin
    Total length: 11 3/16 inches ( 28.42 cm)
    Usable shaft: 10 1/2 inches (26.67 cm)
    Root length: 1 3/4 inch (4.45 cm)
    Root diameter behind knot: 1 5/8 inch dorsal (4.13 cm)
    Root diameter behind knot: 1 3/4 inch profile (4.45 cm)
    Root diameter behind knot: 5 5/8 inch circumference (14.29 cm)
    Knot length on dorsal: 2 inches (5.08 cm)
    Knot diameter: 2 3/4 inch profile (6.99 cm)
    Knot diameter: 2 3/4 inch dorsal (6.99 cm)
    Knot maximum circumference: 9 inch (22.86 cm)
    Pre-knot shaft: 6 3/4 inches (17.15 cm)
    Pre-knot shaft maximum diameter: 2 1/4 inch profile (5.72 cm)
    Pre-knot shaft maximum diameter: 2 inch dorsal (5.08 cm)
    Pre -knot shaft maximum circumference: 7 1/2 inch (19.05 cm)
    Shaft diameter: 1 1/2 inch dorsal (3.81 cm) (behind head)
    Shaft diameter: 1 3/4 inch profile (4.45 cm) (behind head)
    Head length: 3 inches (7.62 cm)
    Head maximum diameter: 2 inches dorsal (5.08 cm)
    Head maximum diameter:1 7/8 inch profile (4.76 cm)
    Head maximum circumference: 6 1/4 inches (15.88 cm)
    Tip: 1 inch @ 1/2inch dorsal (2.54 cm @ 1.27 cm)
    Tip: 5/8 inch @ 1/2 inch profile (1.59 @ 1.27 cm)

    Raptor:
    Total length: 11 1/2 inch natural (29.21 cm)
    Total length: 12 inch extended (30.48 cm)
    Total usable shaft: 10 1/2 inch natural (26.67 cm)
    Total usable shaft: 11 inch extended (27.94  cm)
    Space behind first knot: 1 1/2 inch (3.81 cm)
    Diameter behind first knot: 1 15/16 inch profile (4.92 cm)
    Diameter behind first knot: 1 1/2 inch dorsal (3.81 cm)
    Knot segment length: 4 1/4 inch  (10.80 cm)
    Knot 1: 1 3/8inch profile (3.49 cm)
    Knot 1: 1 7/8 inch dorsal (4.76 cm)
    Knot 1: 7 inch circumference  (17.78 cm)
    Knot 2: 2 3/8 inch profile (6.03 cm)
    Knot 2: 1 7/8 inch dorsal (4.76 cm)
    Knot 2: 6 7/8 inch diameters (17.46 cm)
    Knot 3: 2 1/8 inch profile (5.40 cm)
    Knot 3: 1 5/8 inch dorsal (4.13 cm)
    Knot 3 : 6 inch circumference  (15.24 cm)
    Pre-knot shaft length: 4 inch natural (10.16 cm)
    Pre-knot shaft length: 4 3/4 inch angular (12.07 cm)
    Diameter behind head: 1 5/8 inch profile (4.13 cm)
    Diameter behind head: 1 1/2 inch dorsal (3.81 cm)
    Circumference behind head: 4 3/4 inch (12.07 cm)
    Head length: 2 3/4 inch natural (6.99 cm)
    Head length: 3 inch angular (7.62 cm)
    Maximum head diameter:2 inch profile (5.08 cm)
    Maximum head diameter:1 3/4 inch dorsal (4.45 cm)
    Maximum head circumference: 6 inch (15.24 cm)
    Tip: 1/2 inch @ 1/2 profile (1.29 cm @ 1.27 cm)
    Tip:5/8 inch @ 1/2 dorsal (1.59 cm @ 1.27 cm)

    Buck-e-rutt the Deer
    Total length: 13 inches natural (33.02 cm)
    Total length:13 1/4 inches extended (33.66 cm)
    Usable shaft: 11 1/2 inch natural (29.21 cm)
    Usable shaft: 12 inch extended (20.48 cm)
    Bulb 1 length: 2 inches (5.8 cm)
    Bulb 1 max diameter: 2 inch profile (5.8cm)
    Bulb 1 max diameter: 1 3/4 inch dorsal (4.45 cm)
    Bulb 1 max circumference: 6 inch (15.24 cm)
    Bulb 2 length: 1 1/4 inch (3.18 cm)
    Bulb 2 maximum diameter: 1 5/8 inch profile (4.13 cm)
    Bulb 2 maximum diameter: 1 5/8 inch dorsal (4.13 cm)
    Bulb 3 maximum circumference: 5 1/4 inch (13.34 cm)
    Pre bulb shaft length: 8 inches natural (20.32cm)
    Pre-bulb shaft length: 8 1/4 inches extended (20.96 cm)
    Maximum shaft diameter:: 1 3/4 inch profile (4.45 cm)
    Maximum shaft diameter: 1 5/8 inch dorsal (4.13 cm)
    Maximum shaft circumference: 5 1/2 inch  (13.97 cm)
    Shaft diameter behind head: 1 1/8 inch profile (2.85 cm)
    Shaft diameter behind head: 1 inch dorsal (2.54 cm)
    Head length: 2 3/8 inch natural (6.03 cm)
    Head length: 2 1/4 inch angular (5.72 cm)
    Maximum head diameter: 1 1/4 inch profile (2.18 cm)
    Maximum head diameter: 1 1/8 inch dorsal (2.86 cm)
    Maximum head circumference: 4 inch (10.16 cm)
    Tip diameter: 3/4 inch @ 1/2 inch profile (1.91 cm @ 1.27 cm)
    Tip diameter: 3/4 inch @ 1/2 inch dorsal(1.91 cm @ 1.27 cm)
    Tip diameter: 2 1/4 inch (5.72 cm @ 1.27 cm)

    Knight Rider
    Total length 13 1/2 inch (34.29 cm)
    Usable shaft: 12 inch (30.48 cm)
    Shaft diameter 3/4 inch from base: 2 9/16 inch profile (1.91 cm @ 6.51 cm)
    Shaft diameter 3/4 inch from base: 2 5/8 inch dorsal (1.91 cm @ 6.51 cm)
    Shaft length to medial ring: 4 inch (10.16 cm)
    Shaft diameter behind medial ring: 2 1/4 inch profile (5.72 cm)
    Shaft diameter behind medial ring: 2 inch dorsal (5.08 cm)
    Medial ring segment length: 1 1/4 inch (3.18 cm)
    Maximum medial ring diameter: 2 13/16 inch profile (7.14  cm)
    Maximum medial ring diameter: 2 1/4 inch dorsal (5.72 cm)
    Maximum medial ring circumference: 8 1/2 inch (21.59 cm)
    Shaft length post flare to medial segment: 4 1/2 top 5 bottom (11.43 cm top, 12.70 cm bottom)
    Shaft diameter behind flare (angular): 1 3/4 inch profile (4.45 cm)
    Shaft diameter behind flare (angular): 1 1/2 inch dorsal (2.81 cm)
    Shaft diameter behind flare (angular): 5 1/4 inch (13.34 cm)
    Flare maximum diameter (angular): 3 1/8 inch profile (7.94 cm)
    Flare maximum diameter (angular): 2 1/4 inch dorsal (5.72 cm)
    Flare maximum circumference (angular): 9 inch  (22.86 cm)
    Tip: 1 inch @ 1/8 inch dorsal (2.54 cm @ .32 cm)
    Tip: 1 inch @ 1/8 inch profile (2.54 cm @ .32 cm)

    Skip the Otter
    Total length: 11 3/4 inch  (29.85 cm)
    Usable shaft: 10 1/2 inch (26.67 cm)
    Diameter 1 inch from base: 2 inch profile (5.08 cm)
    Diameter 1 inch from base: 1 1/2 inch (3.81 cm)
    Shaft segment 1 length: 5 inch (12.70 cm)
    Shaft segment 1 mid diameter: 1 1/2 inch profile (3.81 cm)
    Shaft segment 1 mid diameter: 1 5/8 inch dorsal (4.13 cm)
    Shaft segment 2 length: 2 1/4 inch (5.72 cm)
    Shaft segment 2 max diameter: 1 3/8 inch profile (3.49 cm)
    Shaft segment 2 max diameter: 1 3/8 inch dorsal (3.49 cm)
    Shaft segment 2 max circumference: 4 3/8 inch (11.11 cm)
    Diameter behind head (angular): 1 1/4 inch (5.72 cm)
    Diameter behind head (angular): 1 1/8 inch (2.86 cm)
    Circumference behind head: 3 3/4 inch (9.53 cm)
    Head length: 2 1/4 inch (5.72 cm)
    Maximum head diameter: 1 1/4 inch (3.18 cm)
    Tip: 3/8 inch @ 1/4 inch profile (.95 cm @ .64 cm)
    Tip: 1/2 inch @ 1/4 inch dorsal (1.27 cm @ .64 cm)

    Seal
    Total length: 12inch natural (20.48 cm)
    Maximum usable length: 10 1/2 inch (26.67 cm)
    Diameter at base: 2 3/4 inch profile (6.99 cm)
    Diameter at base: 2 inch dorsal (5.08 cm)
    Shaft segment 1 length: 2 3/8 inch (6.03 cm)
    Shaft segment 1 max diameter: 2 1/2 inch profile (6.35 cm)
    Shaft segment 1 max diameter: 2 1/8 inch dorsal (5.40 cm)
    Shaft segment 1 top (angular): 2 1/8 inch profile (5.40 cm)
    Shaft segment 1 top (angular): 1 3/4 inch dorsal (4.45 cm)
    Shaft segment 2 length: 3 1/4 inch  (8.26 cm)
    Shaft segment 2 angular transition 15 deg
    Shaft segment 2 max diameter: 2 1/4 inch (5.72 cm)
    Shaft segment 2 max diameter: 2 inch (5.08 cm)
    Shaft segment max circumference: 6 1/2 inch (16.51 cm)
    Shaft segment 2 top diameter: 1 1/2 inch profile (2.81 cm)
    Shaft segment 2 top diameter: 1 1/2 inch dorsal (2.81 cm)
    Shaft segment 3 angular transition: 35deg
    Shaft segment 3 length: 3 inch (7.62 cm)
    Shaft segment 3 maximum diameter: 1 3/4 inch profile (4.45 cm)
    Shaft segment 3 maximum diameter: 1 1/2 inch dorsal (3.81 cm)
    Head length: 1 1/2 inch (3.81 cm)
    Shaft diameter behind head (angular): 1 3/4 inch (4.45 cm)
    Shaft diameter behind head (angular): 1 1/2 inch (3.81 cm)
    Maximum head diameter (angular): 2 inch (5.08 cm)
    Maximum head diameter (angular):1 3/4 inch (4.45 cm)
    Tip length on top of head: 3/4 inch (1.91 cm)
    Tip: 1/4 inch @ 1/8 inch (1.91 cm @ .64 cm)

    Last Laugh the Hyena
    Total length: 6 3/4 inch (17.15 cm)
    Usable shaft: 5 3/4 inch (14.61 cm)
    Root diameter (1/2 inch from base): 3/4 inch profile (1.27 cm) (1.91 cm)
    Root diameter (1/2  inch from base): 1 inch dorsal (1.27 cm) (2.54 cm)
    Shaft angular transition at root: 10deg
    Maximum shaft diameter: 1 3/8 inch (3.49 cm)
    Maximum shaft circumference: 4 3/8 inch (11.11 cm)
    Shaft diameter behind head: 1 inch (2.54 cm)
    Shaft circumference behind head: 3 1/4 inch (8.26 cm)
    Length of head: 1 3/4 inch (4.45 cm)
    Flare diameter: 1 1/2 inch (3.81 cm)
    Flare circumference: 4 7/8 inch (12.38 cm)
    Tip: 1/2 inch @ 1/4 inch (1.27 cm @ .64 cm)

    Rabbit
    Total length: 9 1/4 inch natural (23.50 cm)
    Total length: 10 inch extended (25.40 cm)
    Usable shaft: 9 inch (22.86 cm)
    Diameter at root: 1 1/2 inch profile (3.81 cm)
    Diameter at root: 1 1/8 inch dorsal (2.86 cm)
    Shaft segment 1 length: 3 inches (7.62 cm)
    Shaft segment 1 max diameter: 1 5/8 inch profile (4.13 cm)
    Shaft segment 1 max diameter: 1 3/8 inch dorsal (1.49 cm)
    Shaft segment 2 length: 3 3/4 inch (9.53 cm)
    Shaft segment 2 max diameter: 1 1/4 inch profile (3.18 cm)
    Shaft segment 2 max diameter: 1 1/8 inch dorsal (2.86 cm)
    Diameter behind head: 1 inch profile (2.54 cm)
    Diameter behind head: 7/8 inch dorsal (2.22 cm)
    Circumference behind head: 3 inch (7.62 cm)
    Length of head: 1 1/2 inch (3.81 cm)
    Mad head diameter: 1 inch (2.54 cm)
    Tip: 3/4 inch @ 1/4 inch (1.91 cm @ .64cm)

    Aries the Ram
    Total length: 10 1/2 natural (26.67 cm)
    Total length: 11 1/4 inch extended (28.58 cm)
    Usable shaft 9 1/2 inch natural (24.13 cm)
    Usable shaft: 10 1/4 inch extended (26.04 cm)
    Root diameter:1 3/4 inch (4.45 cm)
    Shaft segment post medial ring length: 3 3/4 inch (9.53 cm)
    Shaft segment post medial ring max diameter: 1 7/8 inch profile (4.76 cm)
    Shaft segment post medial ring max diameter: 1 3/4 inch dorsal (4.45 cm)
    Medial ring segment length: 1 inch (2.54 cm)
    Medial ring diameter: 2 inch profile (5.08 cm)
    Medial ring diameter: 1 3/4 inch dorsal (4.45 cm)
    Medial ring circumference: 6 inch (15.24 cm)
    Shaft pre-medial length: 2 1/2 inch (6.35 cm)
    Shaft pre-medial max diameter: 1 1/2 inch profile (3.81 cm)
    Shaft pre-medial max diameter: 1 1/4 inch dorsal (2.18 cm)
    Head angular transition 40 deg
    Head length: 2 1/4 inch natural (5.72 cm)
    Head length: 3 1/4 inch extended (8.26 cm)
    Head max diameter: 1 1/4 inch (3.18 cm)
    Tip: 1/2 inch @ 1/8 inch dorsal (1.27 cm @ .32 cm)
    Tip: 3/8 inch @ 1/8 inch profile (.95 cm @ .32 cm)
    Logged

    doiel
    Newbie
    *
    Offline Offline

    Posts: 17


    View current awards
    « Reply #26 on: March 19, 2010, 07:39:42 PM »
    Measured in centimeters. Pounds and inches are rounded.

    Pictures of Silicone Akita have finally been added to my rant thread. Also all the pictures have been re-taken. Hopefully the new ones are better. At least they are more thorough. If this doesn't earn me a cookie, I'm amazed .. half serious Wink

    Natural Akita Silicone
    • Weight                    1.4 lbs (650g) Estimate! (Weighing scale couldn't measure over 500g, so I tried to measure it in two and add them..)
    • Total length              9.4" (24,0cm)
    • Usable length             8.0" (20,5cm)
    • Head width                1.6" (04,0cm)
    • Head circumference        5.3" (13,5cm)
    • Shaft length              5.1" (13,0cm)
    • Shaft width               2.2" (05,5cm)
    • Shaft circumference       6.3" (16,0cm)
    • Knot length               2.2" (05,5cm)
    • Knot width                3.7" (09,5cm)
    • Knot circumference        9.0" (23,0cm)
    • Width near base           2.0" (05,0cm)
    • Circumference near base   6.1" (15,5cm)
    • Length behind knot        0.8" (02,0cm)

    The Helmutt
    • Weight                    0.6 lbs (260g)
    • Total length              7.4" (18,8cm)
    • Usable length             6.3" (16,0cm)
    • Head width                1.2" (03,0cm)
    • Head circumference        3.7" (09,5cm)
    • Shaft length              3.7" (09,5cm)
    • Shaft width               1.4" (03,6cm)
    • Shaft circumference       4.3" (11,0cm)
    • Knot length               1.8" (04,5cm)
    • Knot width                2.8" (07,0cm)
    • Knot circumference        0.7" (18,0cm)
    • Width near base           1.8" (04,5cm)
    • Circumference near base   5.3" (13,5cm)
    • Length behind knot        0.8" (02,0cm)

    Euro Ruff Stuff
    • Weight                    0.5 lbs (222g)
    • Total length              7.8" (19,7cm)
    • Usable length             7.0" (18,0cm)
    • Head width                1.2" (03,0cm)
    • Head circumference        3.3" (08,5cm)
    • Shaft length              4.5" (11,5cm)
    • Shaft width               1.5" (03,9cm)
    • Shaft circumference       4.5" (11,5cm)
    • Knot length               1.8" (04,5cm)
    • Knot width                2.4" (06,0cm)
    • Knot circumference        6.7" (17,0cm)
    • Width near base           1.7" (04,4cm)
    • Circumference near base   5.0" (12,5cm)
    • Length behind knot        0.8" (02,0cm)

    Euro Ruff Jr
    • Weight                    0.3 lbs (116g)
    • Total length              5.2" (13,3cm)
    • Usable length             4.7" (12,0cm)
    • Head width                0.9" (02,2cm)
    • Head circumference        2.8" (07,2cm)
    • Shaft length              2.6" (06,5cm)
    • Shaft width               1.1" (02,7cm)
    • Shaft circumference       3.1" (08,0cm)
    • Knot length               1.4" (03,5cm)
    • Knot width                1.8" (04,5cm)
    • Knot circumference        5.1" (13,0cm)
    • Width near base           1.2" (03,0cm)
    • Circumference near base   3.3" (08,5cm)
    • Length behind knot        0.8" (02,0cm)
    Logged

    Matsi
    Jr. Member
    **
    Offline Offline

    Gender: Male
    Posts: 73


    Arrooooooooooo

  • You own an anthro tiger! Purchase a Silicone toy.

    • WWW View current awards
    « Reply #27 on: March 28, 2010, 03:05:58 AM »
    Tigs Toy
    Total length                            9" (22.9 cm)
    Usable length                          6.5" (16.5 cm)
    Head width                             1.75" (4.4 cm)
    Head circumference                 5" (12.7 cm)
    Shaft length                            9" (22.9 cm)
    Largest Shaft width                  2" (4 cm)
    Smallest Shaft width                1.5" (3.8 cm)
    Largest Shaft circumference      5.25" (12.8 cm)
    Smallest Shaft circumference    4.5" (11.4 cm)
    Base width                              3.25" (8.3 cm)
    Base 2nd width                        4.5" (11.4 cm)
    Base Circumference                 10.25" (26 cm)


    Did it as best I could Tongue
    Logged
    PLEASE READ THE ZETAPAWS FORUM RULES HERE IF YOU DO NOT KNOW THEM!
    My Fur Affinity
    My mate and I's website

    Antikythera
    Newbie
    *
    Offline Offline

    Gender: Male
    Posts: 6


  • Submit a product review of your Zeta Paws purchase. Subscribe to the Zeta Paws newsletter.

    • View current awards
    « Reply #28 on: May 22, 2010, 09:11:35 AM »
    I might choose the Kit Fox for my next toy, which doesn't seem to have all its measurements on the website. If I choose it, I'll be sure to fill out what's missing. However, in return I ask for a cute "I helped the Zeta crew measure toys" award! Hehe =P
    Logged
    Clapclop. Clipclap. Clappyclap.
    Goodgod henev erheard inall.
    A moonlight nightcall: far: far.
    I feel so sad. P. S. So lonely blooming.
    Yes I said Yes I will Yes.

        [無] [☉] [♮] [φ] [♥] [ᴥ] [∴] [∞]
    "Now I will destroy the whole world."

    knotme
    Hero Member
    *****
    Offline Offline

    Gender: Male
    Posts: 2203


    if you wanna know about the non zetas pm me

  • You own Oskar the horse! You own a mr pluggit!

    • View current awards
    « Reply #29 on: June 07, 2010, 12:50:16 AM »
    Here are 7 more that I have that no one has measured yet.

    Mr. Plug It

    Total Length 4.5”   11.43 cm
    Usable Length 3.5”   8.89 cm
    Circumference around head 4.25”   10.795 cm
    Circumference of shaft 4.25”   10.795 cm
    Shaft length 3”   7.62 cm
    Shaft width 1.5”   3.81 cm
    Circumference of base 3.14”   7.976 cm

    Lucas the Pony

    Total Length 6”   15.24 cm
    Usable Length 5”   12.7 cm
    Circumference around flare 6.25”   15.875 cm
    Circumference around medial ring 6.5”   16.51 cm
    Shaft length 3”   7.62 cm
    Shaft width 2”   5.08 cm
    Circumference around base 7.5”   19.05 cm

    Large Torpedo

    Total Length 8”   20.32 cm
    Usable length 7”   17.78 cm
    Circumference at tip 2.5”   6.35 cm
    Circumference at base 5.5”   13.97 cm
    Shaft Length 7”   17.78 cm
    Shaft Width 1.5”   3.81 cm

    Trumpet

    Total Length 9.5”   24.13 cm
    Usable Length 8.5”   21.59 cm
    Circumference at tip 3.25”   8.255 cm
    Circumference at base 8.25”   20.955 cm
    Shaft length 8.5”   21.59 cm
    Shaft Width 3”   7.62 cm

    Slider

    Total Length 10”   25.4 cm
    Usable Length 9”   22.86 cm
    Circumference at tip 7.5”   19.05 cm
    Circumference at base 12.5”   31.75 cm
    Shaft length 9”   22.86 cm
    Shaft Width 4”   10.16 cm

    Gryphon – Silicone

    Total Length 10.5”   26.67 cm
    Usable Length 9”   22.86 cm
    Shaft Length 3.25”   8.255 cm
    Shaft Width 2”   5.08 cm
    Shaft Circumference 6.5”   16.51 cm
    Knot length 2.5”   6.35 cm
    Knot width 3”   7.62 cm
    Knot Circumference 10.5”   26.67 cm
    Circumference at base 7”   17.78 cm
    Circumference of head 6”   15.24 cm
    Length of head 2.5”   6.35 cm
    Width of head 1.75”   4.445 cm

    Orca

    Total Length 15”   38.1 cm
    Usable length 14”   35.56 cm
    Shaft length 8”   20.32 cm
    Shaft width 3.5”   8.89 cm
    Circumference at tip 3”   7.62 cm
    Circumference at widest point 10”   25.4 cm
    Circumference at base 9”   22.86 cm
    Length from veins to base 7”   17.78 cm
    « Last Edit: June 08, 2010, 04:17:55 PM by knotme » Logged
    I own a lot of zetas, with 1 more on the way.
    If at first you dont suceed, sky diving is not for you.
    Proud whore of over 46 toys in my collection and growing every month.

    Pages: 1 [2] 3 4
      Print  
    « previous next »
     
    Jump to: