Pages: 1 ... 8 9 [10]
 91 
 on: May 10, 2013, 08:36:57 PM 
Started by Brownbear - Last post by Brownbear
been a looong day here at Zeta, but all in all I am happy with all the work I got done today Smiley

Sorted through a lot of older paperwork, and have gotten tomorrows bunch ready to go, plus I did todays batch plus all the calls/e-mails/everything customer related taken care of Smiley
It can be hard at time to take care of everything that comes in, but I do it and just move on, trying to make everyone as happy as I can with what they are asking me at the time.

I did have to go to town for abit and get some groceries, then had to top off the tank as we had a good sized thunderstorm rolling in.
We learned the hard way last year when the power was out to make sure everything was topped off and to have lots of batteries, etc. ready for the bad weather.

Its surprising how quickly all the stores can run out of pretty much everything in a hurry, even fuel quickly vanishes.

So we now keep the vehicles as close to topped as we can just in case, plus the ambulance can serve as a backup genny if needed.

well ive rambled on enough, time to feed the fish and shut down for the night.

Be well all.

Bear

 92 
 on: May 10, 2013, 04:38:20 PM 
Started by Brownbear - Last post by Brownbear
orders for 5-10-13:

3468
5918
5957
5998
6071
6146
6184
6185
6188
12179
12255
12257


A few more coming tomorrow, but not 12, as I have a large order to work on tomorrow.

Bear

 93 
 on: May 10, 2013, 02:28:19 PM 
Started by LoonyLisa - Last post by LoonyLisa
Firstly, this is our first Zeta toy. I've been eying them for a long time now, ever since they were only in gel, and finally worked up enough courage to buy one. And boy, were we excited. Our first toy is a blue, medium hardness Euro Ruff Jr. She wanted to try the Kit Fox but I managed to convince her to get something a little bit on the smaller side, since neither of us have ever taken a knotted toy. And it sure is lovely, let me tell you.

Checkout/Shipping: 10/10

Well, checkout went easy enough, like most online shopping nowadays. Since I knew it was going to take anywhere between 2 and 6 weeks I decided to just put it out of my mind and try not to get too anxious about it and work myself up needlessly. Lo and behold not three days later I get an email saying it was shipped already! We figured that Bear must have already had one premade, which was fine by us. We got to try out our toy way quicker than we'd been expecting. So about a week later it arrives at our mailbox and we take it inside and open up our plain packing box. Inside is our cute toy covered in powder in a plastic bag, along with another bag with a condom, wet wipe, candy, care sheet and yiffy safe sex guide. We got a trip out of that safe sex guide, that's for sure! Right away we went to go and rinse our toy off so we could really see it under all that powder.

Toy: 10/10

Well, the toy is a gorgeous deep blue color, exactly like the one pictured in the description. I was astounded by the curves and the way it felt in my hand, the pliability, though a little shocked by it's small size. I think somewhere I was expecting a huge dog cock despite the dimensions given! I daresay it is a gorgeous piece of sexual art. There were of course some teeny imperfections on the shaft and knot, but that's just me looking too damn hard. The Zeta paw logo was cutely printed on the bottom, inside of the suction cup. Of course we fooled around with it, stuck the toy, to our hands, the wall, my partner's forehead... But then it was time for the good stuff.

In Use: Vaginally (Me) 10/10

So, gory details aside, things got hot and heavy and before I knew it I had our nicely lubed up toy pressed to me. Well, the curved tip against my clit was almost enough to make me cum immediately. It flexes and cups it very differently from a human finger and feels absolutely exquisite. The feel of the shaft was yummy inside, not too deep, not too thick. The feel of the knot against my opening with each thrust sent me into overdrive. When she finally pushed the knot into me, the bulge was just perfect that it snugged right against my g-spot and I came immediately, despite my desire to hold on. I took the knot a little too easily, so I'm very eager to try something bigger. Overall, this is going to be one of my favorites. I loved the fullness and just the overall feeling of the toy.

Vaginally (Her) 7.5/10

My partner is a good bit... tighter than me, but from what she has told me, the shaft went easily enough. It was slightly painful, but with constant, slow movement she opened up to it. When I tried to insert the knot it hurt her but it must have been a good thing because she came right away. The second time around much the same thing happened, and the knot must have been that perfect pain/pleasure for her. She says that she loves the feeling of the flat side of the tip against her clit, same as I did. Overall, I do believe she really enjoyed it, though I imagine that this will be more my toy than hers.

Orally: Coming soon. (I imagine that I will like it a lot.)

Anally: Coming soon. (I am moderately experienced in anal, but we will see when I get the time to devote to taking that knot up my ass.)

Overall: I loved it! I want more and as such my wonderful lover has just ordered the original Euro Ruff Stuff in frost, which I am so excited about. I will make sure to post a review about that one too and hopefully update this one once I get a little more time with my puppy.

 94 
 on: May 10, 2013, 11:44:00 AM 
Started by Muley - Last post by Talarath
The fact that other 3D printed toys have that 'texture' is laziness. There's no reason to cut corners like that.

Not entirely.  As there are several different 3d printing methods and many more materials for each method it's may be hard or impossible to get a smooth surface.  If it's using a powder resin then the resulting printed positive needs to be sanded.  The problem here arises from the fact that the shell is normally only 0.5-2mm thick and you have to be quite gentle to not break it or sand away too much.  Then when casted into silicone, even the slightest imperfection is picked up so you would probably need to go all the way up to 10k grit sandpaper (or higher.)

Non-3d toys are done using sculpy or another clay and you can easily smooth it out with your fingers.  I have no idea if Bear fires his sculpy molds or not.  If they are then it's even smoother.

 95 
 on: May 09, 2013, 07:47:24 PM 
Started by bryofromohio - Last post by Brownbear
I have 2 large canine toys I am wanting to sell.

both are in Gel, and made by an old toy company called "Sun Don't Shine"

One is a red canine named Clifford, and as you can see in the pics, he is HUGE.
It was used many years ago, but was cleaned and put away.

Im not sure of the name on the other, but I do know only a very few were made.
the knot on this guy is Massive, as you can see.
It has never been used.

  I would like to find them a new home as I just cant use toys of this size, and would prefer someone to have them who can.

The price for both is $400 plus shipping.
Please let me know if you are interested so we can work something out.

Bear

 96 
 on: May 09, 2013, 04:02:11 PM 
Started by bryofromohio - Last post by knotme
Selling Large mint green 8 firmness EE werewolf Asking 90 ( retails 120 )  Been used a few times never past the knot though

Selling EE Cody earth brown 8 firmness Asking 40 ( retails 55 )  Great toy, just need a little extra money

I do take pay pal now

These are the only two I have right now really need to get them sold ASAP please.

pm me with questions and inquiries.

 97 
 on: May 09, 2013, 03:05:03 PM 
Started by Brownbear - Last post by Brownbear
well im back at work and making toys as fast as I can here Smiley
It was nice being off yesterday, and I spent most of the day doing not much of anything at all, just watching a few dvd's and kicking back on the couch.
about the only work I did was house chores, then I cutup and burned an old pear tree that died of disease, so it had to be destroyed.

so far today ive taken care of all the e-mails and my quota for the day. now ill be making tomorrows toys here in just abit.

Just sitting here and typing now, as I watch a thunderstorm slowly roll in and make it get darker here, and I can hear abit of rolling thunder in the distance Smiley

welp, im off to work now Smiley
Take care everyone

Bear

 98 
 on: May 09, 2013, 02:55:16 PM 
Started by Brownbear - Last post by Brownbear
I still have:

1 pink knotty instructor
1 cookies and cream trumpet
1 yellow kit fox
1 glow purple keeper
1 green kit fox
1 brown kit fox
1 green ruff junior
2 green ruff juniors
black small johns
1 black titan

 99 
 on: May 09, 2013, 01:55:13 PM 
Started by WVZeta - Last post by mrmaigo
BTT! Mine is getting old...  Huh

 100 
 on: May 09, 2013, 01:35:46 PM 
Started by Muley - Last post by mrmaigo
The Euro style toys are as slick as I can make them.

All but 1 (The Tentacle) of my toys is sculpted by hand, so there is no texture like a 3D printed toy.

Bear

The fact that other 3D printed toys have that 'texture' is laziness. There's no reason to cut corners like that.

Pages: 1 ... 8 9 [10]